Lutron RRA2/Caséta  

Developer: FlyingDiver     Like this plugin? Show your appreciation!
Category: Hubs and Protocol Bridges
Github: Github Repo
Assistance: Get help!   
Plugin ID: com.jimandnoreen.indigoplugin.lutron-radiora2
Latest release: v2022.1.2 released on Jan. 14, 2023
Release downloaded: 81 times
Requires: Indigo v2022.1.0 or higher
(Check the Releases tab below for older releases that may have different requirements)
  Download latest release

Lutron RadioRA 2 / Homeworks QS / Caséta Plugin

Indigo plugin for Lutron systems, including RadioRa 2 , RRa2 Select, Homeworks QS, and Caséta

Requirement
Minimum Indigo Version 2022.1
Python Library (API) Official
Requires Local Network Optional
Requires Internet No
Hardware Interface Optional Serial

Warning

This plugin is now Legacy status. It will continue to be supported for Indigo changes, if needed, but no new features will be added. The RRA2 and Homeworks devices supported by this plugin are no longer available from Lutron. All other devices are supported by the new Lutron Leap plugin.

Requirements

  1. For RadioRa2, a Main Repeater (RR-MAIN-REP-WH) with ethernet or serial connection to the Indigo server.

  2. For RadioRa2 Select, a Main Repeater (RR-SEL-REP2) with ethernet.

  3. For Homeworks QS, a HQP6-1 or HQP6-2 Processor.

  4. For Caséta, a Wireless Smart Bridge Pro (L-BDGPRO2) with ethernet.

Installation

  1. Download the plugin zip file and double-click it to expand. Double-click the Lutron RadioRA 2 plugin to install it.

  2. For RadioRa 2, you can connect to the main repeater either via Ethernet or a Serial using a USB to serial adapter.

  3. For Homeworks QS, Caséta, or RadioRa2 Select, only Ethernet is supported.

  4. The initial configuration dialog will prompt you to specify a serial port or IP connection. If you check the option for IP, you must enter a valid username and password. For Caseta systems, this is the telnet login, not the login you use for the Caseta app. Foe Caseta, be sure to enable telnet support in the Advanced settings in the mobile app.

  5. For Serial, select the connection type and device address in the Plugin configuration dialog. Although it costs more than most generic adaptors, the Keyspan adapter, which is solidly built and universally supported, is highly recommended.

Usage

  1. Starting with version 7.2.0, this Plugin will automatically created Indigo devices to match your existing Lutron installation. See the Wiki for more details. This works for switches, dimmers, keypads, motion sensors, VCRX, and HVAC interfaces.

  2. The Plugin will also create Indigo Devices to represent Room Groups and Timeclock Events. You can also have it automatically create Triggers for these devices.

  3. When creating triggers for different events, select the event or device from popup lists. Knowing integration IDs is no longer required for trigger creation.

  4. Creating devices manually does require the Integration ID (and Component ID).

Plugin Limitations

  1. The Lutron fan switches have four fan speeds (low, medium, medium-high, and high) but only three of these speeds are selectable from the Indigo GUI.

Indigo 7 Only

Version 7.0.0 and later of this plugin require Indigo 7 or greater.

PluginID: com.jimandnoreen.indigoplugin.lutron-radiora2

Release details
Released on: Jan. 14, 2023
Requires: Indigo v2022.1.0+
Downloaded: 81 times 
Changes in this release

Removed references to self.lastBrightness

Release details
Released on: Dec. 23, 2022
Requires: Indigo v2022.1.0+
Downloaded: 29 times 
Changes in this release

Fixes for 7 button keypads

Release details
Released on: Nov. 7, 2022
Requires: Indigo v2022.1.0+
Downloaded: 16 times 
Changes in this release

Enabled pico buttons for linked devices (Issue #58) More Python3 cleanup Removed cached Indigo devices

Release details
Released on: Nov. 2, 2022
Requires: Indigo v2022.1.0+
Downloaded: 29 times 
Changes in this release

Fixed bug from adding room editing in 2022.0.6.

Release details
Released on: June 22, 2022
Requires: Indigo v2022.1.0+
Downloaded: 56 times 
Changes in this release

Enabled editing of Room property

Release details
Released on: June 5, 2022
Requires: Indigo v2022.1.0+
Downloaded: 41 times 
Changes in this release

Added ability to rename devices when importing from Repeater. Useful to sync names between systems.

Release details
Released on: June 2, 2022
Requires: Indigo v2022.1.0+
Downloaded: 14 times 
Changes in this release

Fixed linked device handling

Release details
Released on: June 2, 2022
Requires: Indigo v2022.1.0+
Downloaded: 6 times 
Changes in this release

Fix for bug in original button press event

Release details
Released on: April 26, 2022
Requires: Indigo v2022.1.0+
Downloaded: 41 times 
Changes in this release

Fix for Pico button triggers

Release details
Released on: Oct. 23, 2020
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 171 times 
Changes in this release

Added battery level support for Picos, Shades, Sensors Also fixed old bug in sensor devices

Release details
Released on: Sept. 11, 2020
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 22 times 
Changes in this release

Additional exception check.

Release details
Released on: Aug. 28, 2020
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 59 times 
Changes in this release

Corrected status display for Gateway device. Also pre-release fixes.

Release details
Released on: May 22, 2020
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 42 times 
Changes in this release

This release supports connecting to multiple independent Lutron systems. This allows for control of local and remote systems, as well as multiple local systems. Useful for Caseta installations too large for a single Smart Bridge Pro.

To support this, the interface to the Lutron system is now handled by a new IP or Serial "Gateway" device. On first run for an existing Indigo install, the plugin will create an appropriate gateway based on the existing plugin configuration data. The device will be named "Lutron IP Gateway" or "Lutron Serial Gateway".

This version of the plugin also has a number of bug fixes, including fixes to the dimmer "Fade" command and to shade "up/down/stop" commands.

Release details
Released on: Aug. 22, 2019
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 107 times 
Changes in this release

Fixed bug in restart request

Release details
Released on: June 30, 2019
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 79 times 
Changes in this release

Fixes bug in Fade time format. Makes port field visible in config dialog. Fixed bug in logging.

Release details
Released on: June 14, 2019
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 29 times 
Changes in this release

Fixed issue #33.

Release details
Released on: May 22, 2019
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 37 times 
Changes in this release

Issues #29 and #30.

Added shade commands: Start Raising Start Lowering Stop Raising/Lowering

Changed device type names to Lutron instead of RadioRa 2.

Release details
Released on: Dec. 12, 2018
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 70 times 
Changes in this release

Fix for https://github.com/FlyingDiver/Indigo-radiora2/issues/27

Release details
Released on: Nov. 15, 2018
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 28 times 
Changes in this release

Fixes error creating Caseta devices.

Release details
Released on: April 25, 2018
Requires: Indigo v7.0.2 thru v2022.2
Downloaded: 76 times 
Changes in this release

Same as 7.2.0-b6, marked as actual release.

Release details
Released on: Feb. 23, 2018
Requires: Indigo v7.0.2 thru v2022.2
Changes in this release

GHPU fix

Release details
Released on: Nov. 29, 2017
Requires: Indigo v7.0.2 thru v2022.2
Changes in this release

Merged Jim's changes:

Error handling for socket connect failure Hide fade rate in dimmer config Error handling for update server connection issues

Release details
Released on: Nov. 28, 2017
Requires: Indigo v7.0.2 thru v2022.2
Changes in this release

No code changes from 7.0.3, just a version bump.

Release details
Released on: Aug. 19, 2017
Requires: Indigo v7.0.2 thru v2022.2
Changes in this release

Added error trapping for corrupt ~OUTPUT strings

Release details
Released on: Nov. 20, 2016
Requires: Indigo v7.0.2 thru v2022.2
Changes in this release

Fixed problem building trigger list

Release details
Released on: Nov. 19, 2016
Requires: Indigo v7.0.2 thru v2022.2
Changes in this release

Updated for Indigo 7

Improved logging using new Indigo 7 logging system Bug fixes New Action for setting a Lutron Dimmer type device to a specific brightness with specified Fade time

Release details
Released on: Aug. 18, 2016
Requires: Indigo v6.0.0 thru v2022.2
Changes in this release

Fixed trigger processing

Release details
Released on: Aug. 18, 2016
Requires: Indigo v6.0.0 thru v2022.2
Changes in this release

Fixed delay in serial port comms

Release details
Released on: Aug. 17, 2016
Requires: Indigo v6.0.0 thru v2022.2
Changes in this release

Merged Rapamatic's fan speed fix and button press events, with some debug log changes.

Detabbed source per PEP8.

Upgraded to actual release (not pre-release)

Release details
Released on: June 12, 2016
Requires: Indigo v6.0.0 thru v2022.2
Changes in this release

Adds TimeClock and Group (Occupancy) Events/triggers

Adds BrightenBy and DimBy support for Indigo dimmer devices

Adds GutHubPluginUpdater support

Shortened plugin name for Indigo logging column width issues. Removed leading space from log statements.

Some cleanup to plugin config dialog.