RFXCOM  

Developer: Open Source Plugins
Category: Hubs and Protocol Bridges
Github: Github Repo
Assistance: Get help!   
Plugin ID: nl.rjdekok.indigoplugin.RFXCOM
Latest release: v2.1.16 released on Oct. 24, 2018
Release downloaded: 2 times
Requires: Indigo v7.0.2 or higher
(Check the Releases tab below for older releases that may have different requirements)
  Download latest release

RFXCOM Plugin

This plugin interfaces the RFXtrx433 and RFXrec433* from RFXCOM in Indigo as an transmitter and receiver for a large number of protocols. See also http://rfxcom.com/transceivers.htm.

Supported Protocols

The plugin supports the following 433MHz wireless protocols:

  • Visonic
  • Domia/ARC
  • X10 (European only)
  • Somfy RTS (up to 40 RTS devices)
  • Blyss
  • Oregon Scientific
  • Aidebao security
  • ATI Remote Wonder
  • ATI Remote Wonder Plus
  • ATI Remote Wonder II
  • ANSLUT (learning mode)
  • Byron SX chime
  • ByeByeStandBy
  • Brel blind motors
  • cent-a-meter
  • Chacon (learning mode)
  • Chacon (with address code wheels)
  • Chuango security sensors
  • CoCo (learning mode)
  • CoCo (with address code wheels)
  • DI.O (learning mode)
  • DI.O (with address code wheels)
  • Dooya blind motors
  • Ebode
  • ELRO AB400,AB600
  • ESMO blind motors
  • Everflourish EMW100
  • Harrison curtain
  • Hasta new blind motors
  • HomeEasy UK (learning mode)
  • HomeEasy UK (with address code wheels)
  • Intertechno (learning mode)
  • Intertechno (with address code wheels)
  • JVS screens
  • Kerui security sensors
  • KlikAanKlikUit (learning mode)
  • KlikAanKlikUit (with address code wheels)
  • LightwaveRF
  • Livolo aplliance & dimmer
  • Louvolite one touch motorised blinds
  • Maverick ET-732/733 BBQ/Smoke temperature
  • MDremote 106 LED dimmer
  • Meiantech security sensors
  • Mertik Maxitrol Fire Place controllers
  • NEXA (learning mode)
  • NEXA (with address code wheels)
  • OWL – CM113,CM119,CM160
  • Quotidom blind motors
  • RFXSensor
  • RFXMeter
  • TRC02 RGB LED strip driver
  • RohrMotor24 RMF blind motors
  • RollerTrol R-series blind motors
  • Simu RTS blind motors
  • YOODA blind motors
  • X10 PC Remote
  • Xdom

Downloading for use

Click the releases link above and download the release you’re interested in. Once downloaded to your Indigo Server Mac, double-click the .indigoPlugin file to install.

How to use

Mac OS X Mavericks and above include the required FTDI driver, but previous versions will require you to install the driver which can be downloaded from their website.

Once you have the driver installed, enable the debug log in the configuration and open the event log to see which devices are received. Add the devices as instructed in the event log.

Getting Help

If you have questions, the best place to start is on the RFXCOM forum on our forums.

Plugin ID

Here's the plugin ID in case you need to programmatically restart the plugin:

Plugin ID: com.indigodomo.opensource.isybridge

Contributing

If you want to contribute, just clone the repository in your account, make your changes, and issue a pull request. Make sure that you describe the change you're making thoroughly - this will help the repository managers accept your request more quickly.

Terms

Indigo Domotics is hosting the repository and will do minimal management. Unless a pull request has no description or upon cursory observation has some obvious issue, pull requests will be accepted without any testing by us. We may choose to delegate commit privledges to other users at some point in the future.

We (Indigo Domotics) don't guarantee anything about this plugin - that this plugin works or does what the description above states, so use at your own risk. Support will continue to be provided by RFXCOM through the RFXCOM forum mentioned above.

Release details
Released on: Oct. 24, 2018
Requires: Indigo v7.0.2+
Downloaded: 2 times 
Changes in this release
  • Fixed bug that caused error reports for duplicate device
Release details
Released on: Sept. 15, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Fixed RFXCOM temp sensor and sensorValueType errors.
Release details
Released on: Sept. 10, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Fixed bug that caused a "tUnits not defined" error.
Release details
Released on: June 2, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Fixed bug caused by missing MultiplyBatteryLevel device state.
Release details
Released on: May 20, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Added configuration option to set # of digits stored in state values and displayed in the status column for Temperature, Rain values and Wind values.
  • Fixed a bug that rarely occurred at midnight during counter resets.
Release details
Released on: April 13, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Fixed bug that caused temperature sensor values to not display in status column of main window.
Release details
Released on: April 9, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Fixed bug temperature sensor updating bug.
Release details
Released on: March 19, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Fixed bug that prevented energy, gas and water meter values from being reset at midnight.
Release details
Released on: March 9, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release

- Added minmax for yesterday device states for temperature and humidity. - Added reset sensor menu option (only currently implemented for rain sensor). - Fixed min/max setting at midnight bug. - Optimizations (more batching) of how often device states are updated.

Release details
Released on: Jan. 9, 2018
Requires: Indigo v7.0.2+
Downloaded: 0 times 
Changes in this release
  • Added support for blinds: A-OK RF01, AC114 and AC123 / Motorlux (BlindsT2 / BlindsT3).
  • Added uiValue to _addToBatchStatesChange
  • Added degree symbol to temperature sensor uiValue, changed it to unicode
  • Added possibility to multiply battery level by 10
  • Changed temperature device to inherit from indigo sensor, instead of custom device (many dialog device filters use "indigo.sensor" as filter, causing the RFXCOM temperature sensors to previously not be listed)
  • Changed temperature device definition including removing status request button. Added code to deviceStart to account for missing/wrong pluginProps on plugin update
Release details
Released on: June 10, 2017
Requires: Indigo v7.0.2+
Downloaded: 129 times 
Changes in this release

This version is another attempt to fix the temperature sensor states not updating issue.

Release details
Released on: June 2, 2017
Requires: Indigo v7.0.2+
Downloaded: 15 times 
Changes in this release

This version fixes a bug introduced in 2.1.0 that caused temperature sensors to sometimes not have their device state values updated correctly.

Release details
Released on: Dec. 6, 2016
Requires: Indigo v7.0.2+
Downloaded: 198 times 
Changes in this release

Initial release supporting Indigo 7

Release details
Released on: Dec. 6, 2016
Requires: Indigo v5.0.0+
Changes in this release

Last release for Indigo 5/6.