- Posted on
Sat Mar 12, 2016 12:00 am
-
LeeButler
offline
-
- Posts: 22
- Joined: Jan 08, 2015
I have a problem with a replacement non-dimming Togglelinc switch (original one died after 5+ years of use. It works fine manually and is sitting right next to another Togglelinc switch that works flawlessly so I know it isn't a noise issue. Before I have it replaced I wanted to know if the log data below points to a hardware problem or a possible software issue.
Is this the new Togglelinc? Is my PowerLinc suddenly flakey?
Thanks,
Lee
I am running Indigo 6.1.7.
I rebooted and tried twice:
Connected to PowerLinc 2448A7 rev2 interface on port usbserial-A60336TU
PowerLinc address 31.17.65, firmware version 3.10
SQL Logger update complete
Mar 11, 2016, 9:42:26 PM
PowerLinc Linking - entered discovery linking mode (240 seconds)
Mar 11, 2016, 9:42:52 PM
PowerLinc Linking - copying all links from old address to new address
PowerLinc Linking - syncing PowerLinc links (address 31.17.65)
PowerLinc Linking - . . adding: INSTEON plc link to controller 3C.56.81, flags 03, group 01, data 00 00 FF
PowerLinc Linking - sync complete
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - sending engine version request to 3C.56.81
PowerLinc Linking - received engine version 02 from 3C.56.81
PowerLinc Linking - sending id request for device information to 3C.56.81
PowerLinc Linking - received id request response from 3C.56.81
PowerLinc Linking - initializing remote device "Garage:Lights" (address 3C.56.81, firmware version 41)
PowerLinc Linking - initialize complete
PowerLinc Linking - syncing remote device "Garage:Lights" (address 3C.56.81, firmware version 41)
PowerLinc Linking - syncing all links
Mar 11, 2016, 9:43:55 PM
Error failed to fetch data from remote module
Error Linking - syncing failed
Error linking failed
PowerLinc Linking - entered discovery linking mode (240 seconds)
Mar 11, 2016, 9:44:32 PM
PowerLinc Linking - copying all links from old address to new address
PowerLinc Linking - syncing PowerLinc links (address 31.17.65)
PowerLinc Linking - . . adding: INSTEON plc link to controller 3C.56.81, flags 03, group 01, data 00 00 FF
PowerLinc Linking - sync complete
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - sending engine version request to 3C.56.81
PowerLinc Linking - received engine version 02 from 3C.56.81
PowerLinc Linking - sending id request for device information to 3C.56.81
PowerLinc Linking - received id request response from 3C.56.81
PowerLinc Linking - initializing remote device "Garage:Lights" (address 3C.56.81, firmware version 41)
PowerLinc Linking - initialize complete
PowerLinc Linking - syncing remote device "Garage:Lights" (address 3C.56.81, firmware version 41)
PowerLinc Linking - syncing all links
Mar 11, 2016, 9:45:38 PM
PowerLinc Linking - . . . read: INSTEON dev link to controller 31.17.65, flags A2, group FE, data FF 00 00
Mar 11, 2016, 9:46:33 PM
Error failed to fetch data from remote module
Error Linking - syncing failed
Error linking failed
PowerLinc Linking - entered discovery linking mode (240 seconds)
Mar 11, 2016, 9:48:03 PM
PowerLinc Linking - exited linking mode